Latest EMC E20-335 of exam practice questions and answers

If you choose to sign up to participate in EMC certification E20-335 exams, you should choose a good learning material or training course to prepare for the examination right now. Because EMC certification E20-335 exam is difficult to pass. If you want to pass the exam, you must have a good preparation for the exam.

ITCertKing EMC E20-335 exam information are cheap and fine. We use simulation questions and answers dedication to our candidates with ultra-low price and high quality . We sincerely hope that you can pass the exam. We provide you with a convenient online service to resolve any questions about EMC E20-335 exam questions for you.

All the IT professionals are familiar with the EMC E20-335 exam. And everyone dreams pass this demanding exam. EMC E20-335 exam certification is generally accepted as the highest level. Do you have it? About the so-called demanding, that is difficult to pass the exam. This does not matter, with the ITCertKing's EMC E20-335 exam training materials in hand, you will pass the exam successfully. You feel the exam is demanding is because that you do not choose a good method. Select the ITCertKing, then you will hold the hand of success, and never miss it.

If you want to choose passing EMC certification E20-335 exam to make yourself have a more stable position in today's competitive IT area and the professional ability become more powerful, you must have a strong expertise. And passing EMC certification E20-335 exam is not very simple. Perhaps passing EMC certification E20-335 exam is a stepping stone to promote yourself in the IT area, but it doesn't need to spend a lot of time and effort to review the relevant knowledge, you can choose to use our ITCertKing product, a training tool prepared for the IT certification exams.

Exam Code: E20-335
Exam Name: EMC (Symmetrix Solutions Specialist Exam for Implementation Engineers)
One year free update, No help, Full refund!
Total Q&A: 105 Questions and Answers
Last Update: 2013-12-11

In this era, everything is on the rise. Do not you want to break you own? Double your salary, which is not impossible. Through the EMC E20-335 exam, you will get what you want. ITCertKing will provide you with the best training materials, and make you pass the exam and get the certification. It's a marvel that the pass rate can achieve 100%. This is indeed true, no doubt, do not consider, act now.

What is ITCertKing EMC E20-335 exam training materials? There are many online sites provide EMC E20-335 exam training resources. But ITCertKing provide you the most actual information. ITCertKing have professional personnel of certification experts, technical staff, and comprehensive language masters. They are always studying the latest EMC E20-335 exam. Therefore, if you want to pass the EMC E20-335 examination, please Login ITCertKing website. It will let you close to your success, and into your dream paradise step by step.

E20-335 Free Demo Download: http://www.itcertking.com/E20-335_exam.html

NO.1 In symmetric V-max series array running Enginuity 5874, which device is used as a pass-through
device for Auto provisioning?
A. VDEV
B. VCM
C. ACLX
D. SFS
Answer: C

EMC test   E20-335 test questions   E20-335 original questions   E20-335 test answers   E20-335 questions   E20-335 original questions

NO.2 What is required to ensure the integrity of data on the R2 volume during a SRDF fallback operation?
A. Remove entries from the file system table
B. Stop any applications that are accessing the R2 volume
C. Disable journaling on the file system
D. Suspend the RDF link
Answer: B

EMC questions   E20-335 braindump   E20-335

NO.3 On the Symmetrix platform, which type of RAID protection ensures the best random write performance?
A. RAID 1
B. RAID S
C. RAID 6
D. RAID 5
Answer: A

EMC   E20-335   E20-335   E20-335 exam dumps   E20-335 answers real questions

NO.4 Where is the volume Logix Database maintained starting with DMX-3?
A. VCM gatekeeper
B. Symmetrix logical Volume
C. Symmetrix File System
D. VCM database.
Answer: C

EMC   E20-335 study guide   E20-335

NO.5 How does Delta Set Extension help in an SRDF/A deployment?
A. Reduces RPO
B. Reduces the amount of required cache
C. Improves response time
D. Absorbs bursts of host writes
Answer: D

EMC   E20-335   E20-335 certification training   E20-335

NO.6 Which command is used to set or reset HBA port flags on Symmetric arrays running Enable 7.0
Enginuity 5874?
A. symcfg
B. symmask
C. symconfigure
D. symaccess
Answer: D

EMC original questions   E20-335   E20-335 questions   E20-335   E20-335

NO.7 Refer to the exhibit
What is the correct state for the Standard and Rl-BCV prior to issuing a symreplicate start command?
A. Synchronized
B. Suspended
C. Split
D. Write-Enable
Answer: C

EMC exam simulations   E20-335   E20-335

NO.8 You have been asked to create a configuration for a single engine Symmetric V-Max array with 8 DAEs
and 64 drivers. They would like to have the data devices with RAID 5(7+1) protection.
What would be the largest number of members you would recommend for a stripped metavolume.?
A. 4
B. 16
C. 8
D. 32
Answer: B

EMC questions   E20-335 questions   E20-335   E20-335 exam dumps

NO.9 Open Replicator pull will be used to move data between a third party array and a Symmetrix V-Max
array.
What is recommended before starting the Open Replicator session?
A. Ensure that the remote devices are Host read/write enabled
B. Ensure that the control devices are Not Ready
C. Ensure that the remote devices are Host inaccessible
D. Ensure that the control devices are Write Disabled
Answer: C

EMC demo   E20-335 test questions   E20-335   E20-335   E20-335 exam simulations

NO.10 What is recommended before creating a TimeFinder/Mirror replica?
A. Ensure that the production application using the source devices is shut down
B. Ensure that all writes from the production application using the source devices are paused!
C. Ensure that the BCVs are not being actively accessed
D. Set the BCVs to a Not Ready state
Answer: Chttp://www.scribd.com/doc/37352326/Emc-Study-2

NO.11 Diagnostic messaging for the GNS daemon is written to which file?
A. /7SYMAPI/emc/storgnsd .log0
B. /SYMAPI/log/storgnsd.log0
C. /SYMAPl/usr/storgnsd log0
D. /SYMAPl/bin/storgnsd log0
Answer: B

EMC exam prep   E20-335   E20-335   E20-335   E20-335

NO.12 Which file contains the parameter that can change the default behavior of SYMCLI operations, and
there control actions?
A. SYMCLI options File
B. SYMAPI Options File
C. SYMCLI Command File
D. SYMAPI Command File
Answer: B

EMC braindump   E20-335 questions   E20-335

NO.13 One of the requirements, during an Open Replicator implementation is that production application
should not be implemented by open Replication session. An analysis of the control Symmetrix showed
that FA ports are currently 70% utilized. How should pace and ceiling be configured?
A. Pace should be set to 0 and Ceiling should be left at the default
B. Pace should be left at the default and Ceiling set to 30
C. Pace should be left at the default and Ceiling set to 100
D. Pace should be set to 9 and Ceiling should be set to 70
Answer: B

EMC   E20-335 test questions   E20-335   E20-335

NO.14 Refer to the exhibit.
A database server has its logs stored on a volume on the log source Symmetrix V-Max array and its data
stored on a volume on the data source Symmetrix V-Max array. Both source Symmetrix V-Max array
frames replicate data to the target Symmetrix V-Max array at the Remote site. There are two device
groups that have been defined:
One group for the data volume on the Symmetrix containing the data LUNs
One group for the log volume on the Symmetrix containing the log LUNS
What happens if the SRDF inks between the Symmetrix contain the data LUNs and the target Symmetrix
were to fail?
A. The R2 data in the database remains consistent because Enginuity Consistency Assist (RDFECAJ
technology would ensure data consistency).
B. The data in the database becomes inconsistent at the Remote site.
C. An SRDF failover would be initiated on all volumes and processing will automatically be switched over
to the Remote site
D. The R2 volumes in the Symmetrix V-Max containing the log LUNs would become write-disabled to the
database server
Answer: C

EMC   E20-335   E20-335 study guide   E20-335   E20-335 certification training   E20-335 answers real questions

NO.15 An SRDF failover has been executed during the testing phase of an implementation. What is the
expected status of the R1 and R2 devices after performing SRDF failover operation?
A. R1 and R2 Not Ready
B. R1 Wnte Disabled; R2 Read/Wnte
C. R1 Read/Wnte, R2 Read/Wnte
D. R1 Read/Wnte. R2 Wnte Disabled
Answer: Bhttp://www.scribd.com/doc/29541661/Srdf-Operations-white-Paper

ITCertKing offer the latest JN0-380 exam material and high-quality 70-341 pdf questions & answers. Our IIA-CIA-Part1 VCE testing engine and 700-104 study guide can help you pass the real exam. High-quality HP2-Z26 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/E20-335_exam.html