Latest Network Appliance NS0-502 of exam practice questions and answers

ITCertKing Network Appliance NS0-502 exam questions and answers provide you test preparation information with everything you need. About Network Appliance NS0-502 exam, you can find these questions from different web sites or books, but the key is logical and connected. Our questions and answers will not only allow you effortlessly through the exam first time, but also can save your valuable time.

ITCertKing's senior team of experts has developed training materials for Network Appliance NS0-502 exam.Through ITCertKing's training and learning passing Network Appliance certification NS0-502 exam will be very simple. ITCertKing can 100% guarantee you pass your first time to participate in the Network Appliance certification NS0-502 exam successfully. And you will find that our practice questions will appear in your actual exam. When you choose our help, ITCertKing can not only give you the accurate and comprehensive examination materials, but also give you a year free update service.

Exam Code: NS0-502
Exam Name: Network Appliance (NetApp Certified Implementation Engineer-SAN and Virtualization)
One year free update, No help, Full refund!
Total Q&A: 106 Questions and Answers
Last Update: 2013-12-18

About Network Appliance NS0-502 exam, each candidate is very confused. Everyone has their own different ideas. But the same idea is that this is a very difficult exam. We are all aware of Network Appliance NS0-502 exam is a difficult exam. But as long as we believe ITCertKing, this will not be a problem. ITCertKing's Network Appliance NS0-502 exam training materials is an essential product for each candidate. It is tailor-made for the candidates who will participate in the exam. You will absolutely pass the exam. If you do not believe, then take a look into the website of ITCertKing. You will be surprised, because its daily purchase rate is the highest. Do not miss it, and add to your shoppingcart quickly.

Are you still worrying about the high difficulty to pass Network Appliance certification NS0-502 exam? Are you still sleeplessly endeavoring to review the book in order to pass Network Appliance NS0-502 exam certification? Do you want to pass Network Appliance NS0-502 exam certification faster? Be quick to select our ITCertKing! Having it can quickly fulfill your dreams.

ITCertKing's practice questions and answers about the Network Appliance certification NS0-502 exam is developed by our expert team's wealth of knowledge and experience, and can fully meet the demand of Network Appliance certification NS0-502 exam's candidates. From related websites or books, you might also see some of the training materials, but ITCertKing's information about Network Appliance certification NS0-502 exam is the most comprehensive, and can give you the best protection. Candidates who participate in the Network Appliance certification NS0-502 exam should select exam practice questions and answers of ITCertKing, because ITCertKing is the best choice for you.

In ITCertKing's website you can free download study guide, some exercises and answers about Network Appliance certification NS0-502 exam as an attempt.

NS0-502 Free Demo Download: http://www.itcertking.com/NS0-502_exam.html

NO.1 A 100-GB thinly provisioned LUN is allocated to a Windows host. 100 GB of data is written into the
LUN. The current capacity utilization on the disk array as well as the host is 100%. 50 GB of data is
deleted from the LUN. Space reclaimer has NOT been run.
What is the current capacity utilization on both the host and the disk array?
A. 50% on the host, 100% on the disk array
B. 100% on the host, 50% on the disk array
C. 50% on the host, 50% on the disk array
D. 100% on the host, 100% on the disk array
Answer: A

Network Appliance   NS0-502   NS0-502 test   NS0-502 certification

NO.2 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for an
Emulex LP1xxxx/LPe1xxxx HBA?
A. EMutil
B. SANutil
C. hbainfo
D. SANsurfer
E. HBAnywhere
Answer: E

Network Appliance   NS0-502 test   NS0-502

NO.3 Which three protocols can be used for communications between a host running SnapDrive for
Windows and the NetApp Storage Controllers? (Choose three.)
A. http:
B. https:
C. ftp:
D. RPC
E. ssh
Answer: ABD

Network Appliance   NS0-502 pdf   NS0-502 exam dumps   NS0-502   NS0-502 questions

NO.4 A customer has a four-node SUN cluster configuration. Each node has two, dual-ported HBAs.
What is the minimum number of igroups that need to be created to map a LUN to the cluster?
A. 1
B. 2
C. 4
D. 8
Answer: A

Network Appliance certification   NS0-502 exam dumps   NS0-502 original questions   NS0-502 practice test

NO.5 A company has a Fibre Channel environment and wants to connect a new host in a remote data
center using 50/125um OM2 multi-mode fiber cable and needs to support 2 Gb speeds.
What is the maximum distance of the cable run supported in this situation?
A. 50/125um OM2 multi-mode fiber cable supports up to 500 meters at 2 Gb.
B. 50/125um OM2 multi-mode fiber cable supports up to 10000 meters at 2 Gb.
C. 50/125um OM2 multi-mode fiber cable supports up to 150 meters at 2 Gb.
D. 50/125um OM2 multi-mode fiber cable supports up to 300 meters at 2 Gb.
Answer: D

Network Appliance test questions   NS0-502 exam prep   NS0-502 exam dumps

NO.6 Zoning by World Wide Port Name (WWPN) is deployed and a host HBA is replaced.
Which zone change needs to be made?
A. No changes are necessary.
B. The zone configuration should be changed to include the port to which the HBA is connected.
C. The zone configuration should be changed to include the WWPN of the new HBA; the old WWPN will
be automatically dropped.
D. The zone configuration should be changed to include the WWPN of the new HBA and to remove the
WWPN of the old HBA.
Answer: D

Network Appliance original questions   NS0-502 pdf   NS0-502 certification   NS0-502 certification

NO.7 What are three relevant perfstat counters to check for unaligned I/O that do not fall on the WAFL
boundary? (Choose three.)
A. wp.partial_write
B. vvol_read.io_valid
C. read/write_align_histo.XX
D. read/write_partial_blocks.XX
E. xinode content misses
Answer: ACD

Network Appliance exam   NS0-502   NS0-502 original questions   NS0-502 certification training   NS0-502 certification training

NO.8 What would you use to share a data LUN among multiple servers where each server has simultaneous
write access?
A. host-based BootBIOS
B. host-based multipathing
C. host-based volume manager
D. host-based clustered file system
Answer: D

Network Appliance   NS0-502 exam prep   NS0-502   NS0-502

NO.9 Click the Exhibit button.
You see the following error on the storage controller's console or messages file.
What is the most likely cause for this error?
A. portal group misconfiguration
B. iSCSI CHAP misconfiguration
C. iSNS misconfiguration
D. IPsec misconfiguration
Answer: B

Network Appliance questions   NS0-502   NS0-502

NO.10 Any newly installed system with Data ONTAP 7.3.1 supports which cfmode?
A. dual_fabric only
B. single_image
C. partner
D. mixed
Answer: B

Network Appliance   NS0-502 practice test   NS0-502

NO.11 Which FC SAN topology provides the best performance and scalability?
A. cascade
B. core-edge
C. full mesh
D. partial mesh
Answer: B

Network Appliance   NS0-502 questions   NS0-502 test   NS0-502

NO.12 A 200-GB LUN is created in an empty 500-GB volume with the volume guarantee option set to Volume.
LUN reservation is enabled and the fractional reserve is set to 100 and scheduled snapshots are
disabled.
Directly after LUN creation, what is the maximum free space available in the volume?
A. 200 GB
B. 300 GB
C. 400 GB
D. 500 GB
Answer: B

Network Appliance   NS0-502 exam prep   NS0-502   NS0-502 certification   NS0-502

NO.13 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for a
Qlogic QLAxxx/QLExxxx HBA?
A. EMutil
B. SANutil
C. cfgadmin
D. SANsurfer
E. HBAnywhere
Answer: D

Network Appliance certification   NS0-502   NS0-502 answers real questions   NS0-502 practice test   NS0-502 exam dumps

NO.14 Which utility on Windows 2003 and Windows 2008 can be used to collect information about firmware
and driver versions for an Emulex LP1xxxx/LPe1xxx HBA?
A. EMutil
B. SANutil
C. fcp config
D. SANsurfer
E. HBAnywhere
Answer: E

Network Appliance test answers   NS0-502   NS0-502   NS0-502

NO.15 Click the Exhibit button.
Given the information provided in the diagram, what is the appropriate FC topology?
A. point-to-point
B. switched fabric
C. arbitrated loop
D. ring
Answer: B

Network Appliance   NS0-502   NS0-502 pdf   NS0-502

NO.16 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. full mesh
B. core-edge
C. full cascade
D. partial mesh
Answer: B

Network Appliance   NS0-502 certification   NS0-502 questions

NO.17 An organization currently has a NetApp Fibre Channel block-based solution. With limited budget and
resources, they want to create a new disaster recovery site that utilizes a NetApp solution.
What would the optimal solution include?
A. SnapMover and Fibre Channel at the disaster recovery site for all hosts
B. SnapMirror and iSCSI at the disaster recovery site for all hosts
C. Fibre Channel at both locations using ftp to replicate storage
D. MetroCluster and NAS
Answer: B

Network Appliance   NS0-502 exam prep   NS0-502   NS0-502   NS0-502 study guide

NO.18 Click the Exhibit Button
The table highlights the space management policy that is defined for a particular flexvol, acmevol.
Based on the information provided in the table, which action will the storage controller take when it runs
out of space in the volume?
A. It will try deleting Snapshot copies first to reclaim space before trying to grow the volume.
B. It will grow the volume before deleting Snapshot copies.
C. It will only try deleting Snapshot copies to reclaim space and will not grow the volume.
D. It is irrelevant since fractional_reserve is 0%.
Answer: C

Network Appliance exam dumps   NS0-502   NS0-502

NO.19 Click the Exhibit button.
In the diagram shown, a portset is created on controller 1 with the command: controller1>portset create -f
ntapportset 0b. This portset is bound to the igroup with all the initiators in it.
How many paths can host 1 see to a LUN on controller 1?
A. six paths
B. four paths
C. eight paths
D. two paths
Answer: D

Network Appliance   NS0-502 exam prep   NS0-502 original questions

NO.20 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. core-edge
B. full mesh
C. partial mesh
D. partial cascade
Answer: C

Network Appliance   NS0-502   NS0-502

ITCertKing offer the latest HP0-J65 exam material and high-quality 644-068 pdf questions & answers. Our ICBB VCE testing engine and FCNSP.v5 study guide can help you pass the real exam. High-quality 00M-503 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/NS0-502_exam.html